Scrim Banner orange peal

[ken692]

what side is the right side to print on
the flat or the orange peal side??
seems to work on both



Ken:

 

[iSign]

usually it's the flat side. There is a little tooth to the print side, & some banner stock is reverse rolled, while some is not, so I would ask your supplier to be sure, because if it seems to work on both sides, it may not bond as well on the incorrect side.

 

[bob]

The flat side. What you call 'orange peel' is just the texture of the fabric. You can print on both sides but the flat, coated, side works better.