Seal 600 Roller Up/Down Switch

[datoshway]

I have a new to me Seal 600. It's pressurizing but when I flick the switch to drop the rollers, nothing is happening. I called a seal tech, he recommending replacing the Solenoid Valve, i've ordered one but any thing else I can try that may be stopping the switch from working?

 

[Steenland]

Bill Moxley is the Seal guru. He has helped me with info and parts. I'll PM his number.

 

[MarkSnelling]

Bill Moxley is great, but seeing you are in Rhode Island you can also try Scott Tessier...he lives in Connecticut. I think he has largely retired but still likely does work from time to time. I'll direct message you what I believe to be his cell. He used to be the top tech at Seal for 20+ years.

 

[datoshway]

Got to the bottom of it. The problem ended up being a power supply issue, unit was only getting 130volts! Not enough to trigger the 240volt relay!