• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Seiko 64s Service Manual

YumYumSauce

New Member
Could someone please share the service manual with me too? My V-64s is giving me trouble, but I can't find that manual anywhere, so I'm hoping that this one will provide some insight so that I can keep production going.

john@3dcustomsigns.com
 

Antony

New Member
someone has the service manual of seiko 64s service manual. my email is qtelectronics@hotmailcom
please
 
Sorry to be another one on the list, but I could really use that service manual (M-64s or W/V if applicable) if anyone can send it through. Have logged a service call request with our dealer 3 times now over a critical issue and they simply won't get back to us.
I will try to put it up on a permanent file sharing link for others to take it at will if someone would be kind enough to forward it to me.

thomas.cahill@chameleon-group.com.au
 

karst41

New Member
Seiko/HP

I'm parting one out if anyone needs anything, complete printer less the main board.

Save the smaller frame components that have bearings. The Aluminum tension rods are
gold too as are the core spacers.

These components can retrofit to a trimmer table stand. in that you can take a full roll off
the printer and then drop onto the trimmer table stand.

Plotter stands are even better.
 

MrBoh

New Member
I am also looking for the service manual. If anyone could send a link to MrBohSigns@mail.com I'd greatly appreciate it.

I have the error 2340 and noticed the plastic gears that raise and lower the cap assembly won't mesh together. Seems like the teeth are worn out or lost contact. Looks like there are a lot of parts to remove just to even see what's going on for sure. Thanks!
 

Supersonic

New Member
Hello all,

I am new here in the forum.
I have a Seiko ColorPainter M-64s.

I need to install a new print head and need instructions on how to do it.
Can someone send me the manual or the appropriate cutout?
I would be very happy about your help.

Greetings
Stephan
 
Top