• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Setting up gcc expert LX to contour cut in flexi 8.1

CrAkD

New Member
Hey guys,

i picked up a used copy of flexisign pro for use with my gerber edge. I need to contour cut stuff printed on the edge with my gcc expert LX. Someone here said it could be done in flexi in another thread but I couldn't find any thing on how to. Any help would be greatly appreciated.
 

Christian @ 2CT Media

Active Member
You need to load the gcc as a plotter in flexi and setup a contour line and it will add the marks before printing.

I just read your title over, I don't think 8.1 has drivers for the GCC Expert... you may have to upgrade to 10.1
 

CrAkD

New Member
I saw in another thread someone suggested selecting the Roland gx24 and it worked for the expert but not sure if contour will work
 
Top