Side mount hardware for an aluminum sign

[nolanola]

Hello.
Is there a pre manufactured hardware to attach a sign to a wall from a side?

But for large signs?
It will be a double sided aluminum sign 48″ x 24″.

Thank you.

 

[nolanola]

I think there should be a frame and the aluminum panels should be bent on the edges, so the fasteners go from the sides.
Is it the right way of doing it?

Thank you.

to make it look like this, only with no illumination

 

[Starter]

2 pieces of 1x1 aluminum angle "sandwiching" the sign is an option. You can shine/clean the angle with a scotchbrite pad.

 

[nolanola]

Will the 48″ x 24″ sign hold the wind load without the frame?

 

[Billct2]

For a little interior sign sure, for anything large outside, no.
One way, have a frame with the fastening plates welded as one unit.
Attached to wall and then skin it