Sign Rails

[ladeno]

I have a client that wants me to make a sign that he calls a sponsor board that he can slide in the sign. The names would be on a 3m pvc board that
probably would be 4 x 20 inches at the most. I am at a loss what to use for the railing. has anyone done this before or have suggestions?
TIA Lynn

 

[Marlene]

clear tracking for changeable letters might work. you might have to space is out some for the 3mm material

 

[nashvillesigns]

i have done this. down in key west there is a sign that allows for changing such a thing. i cut strips of PVC (1/2x1/2"" and placed a 1/4" rider protector edge on top of that. i used HH-66 plastic glue to bond everything. it works very well. all the PVC sliders were then cut of 1/4" thick stock.

 

[ladeno]

Thank You two very good ideas. I will run both ideas past hubby(since he will be helping on this one).

 

[rjssigns]

J-channel for hanging mirrors. No fabrication involved and it comes in many exciting colors.(lol) Works a treat.