Sign track attachment help

[T.J.]

Good morning. I am new to the forum and wanted some input. I do in house sign work for a company and am making a couple price signs. I have made a couple before but am not please with the way that I attach the sign track to the panel of the sign. How I have done it in the past is to through bolt the track and a plastic back piece to the sign pane. I was thinking I could bond the track to the acrylic back piece and through bolt that to the panel. What methods do you guys use to attach sign track? I am using track that is used with rigid letters going on a vinyl covered aluminum panel. Thanks for any input that you guys have. Awesome site!

Tim

 

[J Hill Designs]

usually nylon hammer rivets when going on plastic

 

[FS-Keith]

We use aluminum pop rivets

 

[Moze]

Weld-On 16 for acrylic to polycarbonate bonding. Weld-On 3 for acrylic to acrylic or polycarbonate to polycarbonate bonding.

 

[Cynosure]

Both options have worked for me in the past. I've had mixed luck with the weld on products. ..if both pieces are new and clean, should work great.

 

[signage]

incorrect post on my part