Signcut with Snow Leopard -- NO GO!

[splizaat]

Hey guys....I'm writing frantically to figure out what to do.

I am on an intel-based mac and recently updated from Mac OS X 10.5 to the new Snow Leopard 10.6. I was running Signcut-x2 to power my Summa D60 plotter but with the new snow leopard upgrade Signcut-X2 only worked half the time....

So I wrote to tech support at Sign Cut asking what to do when they directed me to use the "NEW" Signcutpro. In order to do so, I had to migrate my licenses to the new system. Well Signcutpro will not work what-so-ever with my setup now! So i tried downgrading to the old Sign-Cut X2 and my license says it's "suspended."

I've tried writing signcut support for two days now with no replies. What am I supposed to do? My operation is at a standstill!!!

Matt

 

[Mainframe]

You may want to try flexi starter, works well but I design everything in illy then port it to Flexi, just a suggestion, here is a link where I got mine

http://www.masterwarehouse.com/indexg.html?gclid=CIvIqqfH1pwCFYdB5god9hYqKw

 

[splizaat]

The problem is that I've already paid for signcut...(I do my designing in illustrator and cut with signcut currently)

 

[gfproductions]

Did you resolve your problem?

I have sign cut x2 and was having some major problems myself awhile back.
I use mac os x leopard (not snow leopard yet)
I've been somewhat out of the loop for awhile, and decided to see if I could find someone else who also uses a mac with sign cut. So here I am...
I wanna get my cutter working again, and was hoping you figured out your problems(s).
So, did you get it figured out, and if so.... what did you have to do?

 

[splizaat]

Has anyone gotten SignCut X2 to work properly with Snow Leopard yet???

I don't want to go through the troubles of upgrading then having to downgrade AGAIN if no one has still done it