• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

sp 300 control panel sticker

tomx1138

New Member
I'm looking for a couple of small hopefully, easy to find parts for my roland SP 300 versacamm. first is the cable 24 pin cable approx 23.5" length from the control panel to the mainboard and the sticker for the control panel. Thank you Tom
attachment.php
 

Attachments

  • IMG_1111.jpg
    IMG_1111.jpg
    79.8 KB · Views: 271

jfiscus

Rap Master
Are you sure it's a sticker? It looks screen printed to me, but I cannot recall what Rolands have...
Once you get the new cable, print yourself one. ;)
 

player

New Member
I was thinking...

Remove the existing panel, scan it, then print/lam/cut a new overlay. Make a new skin.
 

buggyjr12

New Member
I need one also. I've been searching for a few years. There HAS to be a dealer out there that has one. I'm sure all the parts didn't just vanish into thin air once they were discontinued.
 

damonCA21

New Member
Roland only make a limited number of spares for each model. They get discontinued once they have sold out, so your only option is to get a used panel. Dealers dont tend to keep stuff like that in stock, if they needed one they would just order from Roland when they needed it
 

FrankW

New Member
The SP300 is discontinued more than 15 years ago, and is out of support too since several years. Specific spare parts could be on stock, but this is not guaranteed.

Spare part is

21475155-00 SHEET,PANEL SP-300
 

netsol

Active Member
I need one also. I've been searching for a few years. There HAS to be a dealer out there that has one. I'm sure all the parts didn't just vanish into thin air once they were discontinued.
if someone post a perfect picture OF A GOOD ONE, it can be duplicated on a gerber edge

we must have SEVERAL members who still print and sell control panel overlays.

i have 3 of the gerbed edges, but, i do not have a roll of the materials needed
 
Top