Speed Keeps Changing

[HaX420]

Well my q-100 keeps changing the speed back to 50 when i just changed it to 10. It does this when i hit cut. Can someone help me solve this problem.

 

[RebeckaR]

You need to change the speed in production manager as well as setting it on the cutter.

 

[HaX420]

You need to change the speed in production manager as well as setting it on the cutter.

Thanks ill try that and ill let you know how it goes..

 

[HaX420]

Ok thanks i got the problem solved...

 

[bob]

You need to change the speed in production manager as well as setting it on the cutter.

While that will work, what you really need to do is set the plotter, whatever brand it might be, to not pay any attention to settings sent via software.

Virtually every plotter has this capability. On a Graphtec it's called 'Condition Priority'. It's called other things on other plotters.

Let the software tell it what to cut, let the plotter decide how to cut it. That way you have things varying only in one location at a time. More than that you do not need.