Jetpack Stickers & Labels
Jetpack Stickers & Labels
Hi! Wondering if anyone has a shortcut or some help to share.
Just got a new Summa S3 TC160 installed. What a beast! Also just learning Onyx Thrive, coming from Flexi.
We make tons and tons of stickers in ~3 ft. panels, about 100 stickers per panel. We have another Summa (S-One) that has been a workhorse, just needed more capacity and was attracted to faster barcode and registration mark reading.
Here's my issue - I can't seem to get the OPOS XY to work. I can get the barcode printed and the cutter reads it and the intermediate marks along the side, but I would really like to be able to use the XY function (camera takes measurements along the line) to keep the cuts accurate and compensate for any bowing in the panel. Our S-One does this all day (via Flexi).
Also, I can't seem to get Onyx to set the parameters on the cutter (force and velocity). Whatever is on the machine panel is how it cuts. I have it set to override the machine, but... it doesn't.
Lastly, I can't seem to get the "cut off media" function to work after a panel is cut with the tangential head. I'd really like it to cut off the sheet when it's done.
Grimco did the install, and did a great job with the cutter and a second printer, but I didn't notice these deficits till today when trying on my own. We had Onyx support logged in earlier to answer a couple other questions, and I'm sure I can go that route to get these problems sorted, but was just curious if anyone here has already solved them. Also, this forum is such a great resource and bank of knowledge, I figured someone else will probably have these same issues as the S3 continues to roll out, and maybe the help I (hopefully) receive here will be beneficial to the next person doing a search.
Cheers, and thanks in advance for any help/advice!
Just got a new Summa S3 TC160 installed. What a beast! Also just learning Onyx Thrive, coming from Flexi.
We make tons and tons of stickers in ~3 ft. panels, about 100 stickers per panel. We have another Summa (S-One) that has been a workhorse, just needed more capacity and was attracted to faster barcode and registration mark reading.
Here's my issue - I can't seem to get the OPOS XY to work. I can get the barcode printed and the cutter reads it and the intermediate marks along the side, but I would really like to be able to use the XY function (camera takes measurements along the line) to keep the cuts accurate and compensate for any bowing in the panel. Our S-One does this all day (via Flexi).
Also, I can't seem to get Onyx to set the parameters on the cutter (force and velocity). Whatever is on the machine panel is how it cuts. I have it set to override the machine, but... it doesn't.
Lastly, I can't seem to get the "cut off media" function to work after a panel is cut with the tangential head. I'd really like it to cut off the sheet when it's done.
Grimco did the install, and did a great job with the cutter and a second printer, but I didn't notice these deficits till today when trying on my own. We had Onyx support logged in earlier to answer a couple other questions, and I'm sure I can go that route to get these problems sorted, but was just curious if anyone here has already solved them. Also, this forum is such a great resource and bank of knowledge, I figured someone else will probably have these same issues as the S3 continues to roll out, and maybe the help I (hopefully) receive here will be beneficial to the next person doing a search.
Cheers, and thanks in advance for any help/advice!
