Temp/Removable Print Film - High Speed

[splizaat]

OK guys --
Unique situation where we have a top speed event with a lot of super cars involved. They're needing 10"x9" numberplate printed for each side of the competing cars.

-The small number plates will be applied to vehicle door (no conform)
-The number plates will be put on at 8am saturday, removed the next day around 8pm.
-Air release is not necessary
-These will NOT be laminated.
-These will NOT be masked.

I need a print vinyl that will stay on during 1/2 mile runs at 200mph. But remove with little effort after two days, and not damage the vehicle.

My first thoughts are Oracal 3268 or 3628. They're thick enough not to need lam or mask, and should remove pretty darn cleanly. Is there a better option out there?

 

[knucklehead]

I made some logo panels for a guy that rebuilds Corvettes, and builds high dollar Cobra replicars. He wanted something to put on the cars at shows and stuff, but removable, and re-usable. The vettes are of course fiber glass, and the cobra bodies are alunimum. So, printed him some on Phototex, I had one set on my truck doors when I delivered them, and of course he wanted to know how fast they would stay on, told him phototex says 500 mph. So, we take them off my truck, and put them on a Linglefinger? super quad turbo corvette, ran up around 160 - 170ish, with no failure. Got back to his house/shop, I took them off the vette, and stuck 'em on the wall. I know he has used them a few times.



i

 

[strypguy]

Oracal 3621. It's has removable adhesive and I've used it on all kinds of projects and it removed cleanly even after several months. John

 

[splizaat]

PhotoTex was my very first idea, but SUBSTANCE VINYL reached out to me and has the perfect film for this. They saw my post and called me on my cell phone..the same vinyl they're using for Targa Trophy events which is similar to this one. Thanks everyone!