Thick clear printable plastic

[Mainframe]

I just got a printed sample from a customer, it is thick clear printable plastic sheet about 4'x4'. Has anyone ever printed on anything like this? It looks like it started out as a clear sheet & they did a digital print on it. It is the first time I have seen one of these, Anyone know if I could find something like this to run through my VP 540?

 

[spectracolor]

I just got a printed sample from a customer, it is thick clear printable plastic sheet about 4'x4'. Has anyone ever printed on anything like this? It looks like it started out as a clear sheet & they did a digital print on it. It is the first time I have seen one of these, Anyone know if I could find something like this to run through my VP 540?

Are you talking about LEXAN? (for backlit lightbox)
If yes, I believe you can print on them.
If it's harder surface, then you'll need flatbed.

 

[Mainframe]

No this is much thinner than lexan, it is stiff clear plastic

 

[AUTO-FX]

optikote 10 mil polycarbonate made by optima ???

 

[artbot]

10 mil is basically thick pc film. if you find out, pm me. i'm about to do some stuff that i'd rather print on thin rigid plastic... i figured i'd use .020 polycarb with a custom coating.

 

[Malkin]

Would this work?
http://www.magicinkjet.com/product_140.html
It's only 6.5 Mils, but might do the trick

 

[Mainframe]

:U Rock:Malkin that is it! Thanks a bunch! I have been doing some work for Lionsgate Films on an upcoming movie called "Abduction" I am getting some crazy & interesting requests for sure, I did a sandblasted sign for a drive by scene & making a bunch of pounce patterns for other signs, now they asked me if this product was available, looks like Fellers & Proveer stock it in my area, Thanks again! :U Rock:

Would this work?
http://www.magicinkjet.com/product_140.html
It's only 6.5 Mils, but might do the trick