Thick Coro

[Mosh]

I am looking for some thick coro, like 1/2" thick and step stakes to match.
Any ideas?

 

[Mosh]

found them...I need to read the fine print!!!

 

[Gino]

found them...I need to read the fine print!!!

It's hard to read the little stuff, when your eyes are all bloodshot and squinty.

 

[Mosh]

Geno, did you look in my window this morning???? You know how it is then....

 

[SignManiac]

10mil is actually 3/8" thick and I believe it is possible to get it in 18mil which I think is about 1/2"

But the step stakes are the tuff one to find for those thicknesses.

 

[J Hill Designs]

I think the 13mm stuff is closest to 1/2" you will get

 

[mikefine]

I am looking for some thick coro, like 1/2" thick and step stakes to match.
Any ideas?

Grimco has heavy stakes (coro101) to use with 10 mil coroplast. This 9 gauge steel stake with 10 mil coro is a nice heavy sign.

 

[Pat Whatley]

My welder does my step stakes for 1/2" coro cheap. They're little more than two pieces of round rod with two 1" x 8" steel plates welded across them. One plate would probably be fine....he's anal about preventing failure so he does two to spread out the pressure when people inevitably hammer on them to get the stakes in the ground.

 

[Tom Dalton]

If you need them cut to size, we sell 10mm coro blanks cut to 24"x36".

Tom
SignsDirect