Tiling Print Issue

[Rickey J]

So I am doing a print where I have to print 3 different tiles. Well tiles 2 and 3 have a large area with solid color and tile 3 had a noticeably different shade of color than tile 2. How can I fix this?

 

[Ken]

Weird..I dont suppose you switched the media roll between prints?
Good luck.
Ken

 

[Rickey J]

Weird..I dont suppose you switched the media roll between prints?
Good luck.
Ken

Nope the same roll. Its on a Roland SP-540i. Maybe the print isn't as dry as the other one? I don't know whats up with it.

 

[boxerbay]

I dont think there is a "fix" other than to reprint it? maybe an ink nozzle got clogged. run a cleaning.

 

[LarryB]

You may want to clean your encoder strip. A dirty encoder strip can have an effect on print quality.

 

[Rickey J]

I dont think there is a "fix" other than to reprint it? maybe an ink nozzle got clogged. run a cleaning.

Nozzles are good.

 

[Rickey J]

You may want to clean your encoder strip. A dirty encoder strip can have an effect on print quality.

Encoder Strip is good as well.

 

[boxerbay]

check your file or re-rip just that panel.

 

[trillion]

use alternate print
mean tile 1 up, tile 2 down n tile up.