Tips to profile Mesh banner

[KaranGrewal]

we are printing on ultraflexx strip plus mesh banner material. using regular vinyl banner profile. but prints are coming out looking very faded. I m thinking about creating a profile for this mesh banner.
Please let me know if have tricks for profiling mesh banner. we have colorgate production 7 rip software and eye one spectrometer.

 

[FrankW]

Will be difficult, because of the structure of the Mesh the i1 will fail measuring. There are measurement devices with a much bigger measuring aperture than the i1, perhaps they work, but I have never tested it with our Barbieri Spectro LFP (2, 4 and 8mm measuring apertures).

 

[guitarguy69]

I have tried raising the ink limit within the banner profile to good results. I also use an infrared drier.