Upgrading to flexi 12

[floater302]

Hello, I just did the upgrade to flexy 12, My problem is I had over 5 prints that was waiting to be cut, and now that I upgraded all my cut files I had in the flexi 11 product manager is gone and I cant open the old product manager to get them, I don't want to waste all my material because of this, anyone have any ideas on how to get the cut files from the old product manager?

 

[Snydo]

Sai really needs to put a warning in that update...I mean come on.

Check your 'jobs' folder in the Flexi directory....maybe they are still around but I doubt it.

You might be able to re-rip the same files? If not, I think you are screwed.

 

[floater302]

UPDATE: I found the folder that the files are saved in.

 

[Allied Digital]

Great - if you ever lose a cut file again, you can send it to print, but in the cut tab, select "cut job only" in the production Mgr.
It will just do the cut portion of the job.