-
I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...
USB for HS15 Plus??
- Thread starter Marlene
- Start date
SignBurst PCs
New Member
You can go a couple of different directions here.
First, you could install a couple Serial ports in the computer.
Second, Gerber has a Serial to USB cable that they sell. If you go this route, you will need to keep the old cable connected to the HS15+ and then use the Gerber cable between the old cable and the USB port in the computer.
First, you could install a couple Serial ports in the computer.
Second, Gerber has a Serial to USB cable that they sell. If you go this route, you will need to keep the old cable connected to the HS15+ and then use the Gerber cable between the old cable and the USB port in the computer.
serial port card
I have a Dell running 32 bit Vista and tried a Roswill dural serial port PCI RC-301. I tried both of my two available slots and both times I get hardware conflicts. The computer will not even boot with the card in.
I hear that the card is better than the adapter cable in slowing down the baud rate to avoid flooding the plotter.
Can anyone recommend a serial port card?
I have a Dell running 32 bit Vista and tried a Roswill dural serial port PCI RC-301. I tried both of my two available slots and both times I get hardware conflicts. The computer will not even boot with the card in.
I hear that the card is better than the adapter cable in slowing down the baud rate to avoid flooding the plotter.
Can anyone recommend a serial port card?