• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Using Flexi starter 10 Production Manager with Flexi 7.6 Pro

B

butcher

New Member
I have a copy of Flexi 7.6 Pro on my Windows 7 64 bit System now. I can only design in it. production manager will not find my plotter even with the usb 64 bit driver installed for my qe60+.

My question is.... If I use my flexi 7.6 Pro to design with can I open or set up the production manager from updated Flexi 10 starter or LXI apprentice to cut it since they are compatible with my plotter.....

Any answers to this would be greatly appreciated.

Thanks in advance
 
Steph_Stamm

Steph_Stamm

New Member
Hey butcher - Flexi 7.x isn't compatible with Windows 7 (it was created well before even Vista came out), but you can design in older versions of Flexi and have the files correctly open in newer versions. It won't work the other way around though. Hope that helps!
 
You must log in or register to reply here.
Top