Welcome To Signs101.com: Largest Forum for Signmaking Professionals

Signs101.com: Largest Forum for Signmaking Professionals is the LARGEST online community & discussion forum for professional sign-makers and graphic designers.

 


  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

UV Flatbed Screen Printing - Tips Techniques

Discussion in 'Screen Printing' started by Eternity, May 22, 2020.

  1. Eternity

    Eternity New Member

    7
    0
    1
    Apr 8, 2020
    Beaumont
    Hey guys! I'm Mr. #UltraNoob so I've been asking for advice on these forums in every thread. I greatly appreciate all of you being patient with me as I find my way around the industry. :p

    Can anyone shed some light on any of the following:

    1. What durometer squeegee is best for UV ink?
    2. How many passes of emulsion do I use on the screen?
    3. What mesh screen should I use?
    4. What brand of ink is best?
     
    Last edited: May 22, 2020
  2. FireSprint.com

    FireSprint.com Merchant Member

    Honestly you are going to need to test over and over again until you find a solution that works for you in your environment.

    We use 80 duro squeegees, 3 passes of emulsion (2 & 1), 355 Mesh, Nazdar, Polymeric, Sun Chemical, Fuji & others all make great ink.

    If you get into a scenario where you can't keep up, or you're tired of spilling ink on your shoes, let us help!

    https://www.firesprint.com/yard-signs/
     
Loading...

Share This Page

 


Loading...