VHB tape

[ChicagoGraphics]

Is there more then one type of VHB tape or just the one and is good for most type of installations?

I'm using it on aluminum signs that are 24"x36" either 0.80 or 0.40, I'm not sure where the customer
is going to install these signs but my guess would be a brick wall I think.

 

[Christian @ 2CT Media]

There are lots of options for VHB. They all have different uses and hold strengths.

 

[Pixels Are Bad Mmmkay?]

Is there more then one type of VHB tape or just the one and is good for most type of installations?

http://multimedia.3m.com/mws/media/67100O/vhb-tapes-technical-data.pdf

 

[rdm01]

The link below has some good information:

http://multimedia.3m.com/mws/mediaw...evTSeSSSSSS--&fn=VHB Design Guide Low Res.pdf

 

[Mosh]

I use the grey 4941 from 3M for stuff like that. Good stuff.

 

[StarSign]

I always felt Beta was better.

 

[ChicagoGraphics]

Thanks for all the info. Do you have to use a lot per sign or just a couple of strips will do?

 

[synergy_jim]

check out duraco. They offer 90% of the holding power of 3M for half the price

 

[Mosh]

Hope the brick is painted or no VHB tape no matter the brand will hold them up.

 

[Pixels Are Bad Mmmkay?]

Thanks for all the info. Do you have to use a lot per sign or just a couple of strips will do?

It doesn't take much. Check out the 3M VHB videos on youtube for a demonstration of the strength and holding power of VHB. It's impressive.

 

[David Wright]

check out duraco. They offer 90% of the holding power of 3M for half the price

What do you recommend to use from them?

 

[nashvillesigns]

i like innotec tape!

www.innotape.com/‎

 

[ChaseO]

I think Duraco has been bought out or changed their name to Essentra. You can easily be overwhelmed with all the different types of tape they offer. Just plan on doing some reading, or call and see what they recommend for your application. The times that I have called, they have been very knowledgeable about their products. They also do free samples if you have time to wait.

 

[synergy_jim]

ahhh yes.... I forgot their parent co. decided to consolidate brands. I knew it was coming but had not happened yet as of my last order. Good stuff anyways!

 

[ChicagoGraphics]

Ok I just found out the aluminum will be going on metal surfaces, now to hunt down the right tape, I'm going to stick with 3M

 

[Christian @ 2CT Media]

4950 is an awesome Metal to Metal VHB Tape. We use it for building Trailer Marquess for our fair clients.

 

[vid]

(snip) ...I'm going to stick with 3M

Your sign should stick with it too!