Welcome To Signs101.com: Largest Forum for Signmaking Professionals

Signs101.com: Largest Forum for Signmaking Professionals is the LARGEST online community & discussion forum for professional sign-makers and graphic designers.

 


  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Vinyl Express 125 blade drag

Discussion in 'Miscellaneous Plotters' started by racershawn, Feb 24, 2011.

  1. racershawn

    racershawn Member

    299
    1
    16
    Feb 23, 2009
    hampton va
    Hey there guys... first time i have had this problem...It seems likle the blade is not picking up far enough off the material as it goes between the cuts and leaves a small scratch... it is not the blade depth as i have not changed the blade or settings and just started having this problem .. anyone else have an problem like this?... thank You!
     
    Tags:
  2. Jim Doggett

    Jim Doggett Very Active Member

    1,304
    1
    0
    Feb 17, 2008
    If I had to guess I'd say it was your cutting strip, or possibly the blade holder. Check with our support folks at support@signwarehouse.com or call us at 800.699.5512.

    Thanks! Jim
     
  3. racershawn

    racershawn Member

    299
    1
    16
    Feb 23, 2009
    hampton va
    thanks for the thought... FYI i fixed it!... it was the little encoder strip... I took it out , fliped it over and screwed it back in... works great now..........thanks all
     
Loading...

Share This Page

 


Loading...