bigkahuna_305
New Member
Ok so a tint buddy of mines is having a issue with it dulling blades super fast, 30 degree and cuts only tint, new teflon strip, and after a few patterns its dull? any thoughts? thanks in advance
-
I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...
Vinyl Express Q54 Help
- Thread starter bigkahuna_305
- Start date
Joseph44708
I Drink And I Know Things
Cutting to deep.
Dont use aftermarket blades from Amazon!.
Dont use aftermarket blades from Amazon!.
bigkahuna_305
New Member
yeah you make no sense at all. that has nothing to do with it
Joseph44708
I Drink And I Know Things
You only need the slighest pressure to cut.
When you use too much pressure (too deep) the blade is binding through the cut and wears out the cutting tip surface of the blade and then it wont track accuratly.
Does that make sense?
After Market Blades Are Junk!
When you use too much pressure (too deep) the blade is binding through the cut and wears out the cutting tip surface of the blade and then it wont track accuratly.
Does that make sense?
After Market Blades Are Junk!