Vision Pro ( Font problem

[Kat Gilland]

After moving my engraver to a more appropriate room and then having a power hiccup that knocked out my software I am back up and running except my Tactile font.

IT uninstalled and reinstalled my software and fonts... now the UNION-1 I have been using for 7 years for my tactile signs is wonky. It no longer functions as the outline of a three dimensional letter, instead it shows as a single thin line.

Has anyone had this issue?

Am I missing a setting that was put in before me?

Any advise is appreciated.

I am using Vision Pro 9 for a Vision 2550 Router

 

[Jrassel]

What do you mean an outline of a 3d letter? Are you doing ada signs? Is this for proofing purposes? I ask because I'm sure you know you can't engrave 3d with vision 9.

 

[Kat Gilland]

Yes, sorry. These are the raised text (tactile) for ADA signs. The UNION-1 font used to appear as the outer contour of the letters. But now it appears as a single line in the center of the letter form.
Even if I plot the cut I still get that line instead of the full letter form

 

[Jrassel]

Yeah I just opened vision on my computer here and I checked it out and it appears the union one on vision pro 9 is exactly the same for me but it seems to be text size because I have Union one through 55

 

[Kat Gilland]

I have always had mine set at 1 inch height using UNION-1 with no issue.
I assumed there was a setting somewhere in my inherited software that somehow got changed in all the reinstalls but for the life of me I can't find anything.