• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

VJ1204 and GMI Hi-Stat Cling

Print-Kwik

New Member
Anyone have any luck printing on GMI Hi-Stat Cling (8mil white). GMI even has a profile for the printer/material combo but I can't even get close to a good print. Very splotchy...

Any hints/tips/tricks?

Thank you
 

Matt Cuellar

New Member
I have had good success with both the clear and white version of those clings. I was using Wasatch and had to do a 720x1440 w/double-strike to achieve my ideal density, but worked. It was slow, but quality was good. I agree with Randy A as I never had splotchy results, so check the life of the media to make it wasn't yellowing or just old. Good luck!
 

Print-Kwik

New Member
well, the alcohol didn't make a difference. Bi-Di actually appears to help... heating settings made a big difference. Too low = bad, Too high = really bad.

I think I have it printing so-so. A little more playing might do it.

Luckily, the customer thinks it wonderful...

Thanks for the tips guys.
 
Top