VS540 Cutting Issues

[Paparoach]

Hi Guys,

Need some help printer keeps cutting off. We have replaced the cut carriage board cleaned the encoder
and have done all the calibrations necessary.

Sometimes it prints good but mostly it starts good but as the cut continues it goes off generally north south when looking
at the printer head on. This happens with and without crop marks. The right side of the printer near the control panel is where
the best cutting happens and the farther away it gets the worse it get.

Is this a belt tension issue? We are stumped.

Thanks in advance.

 

[Paparoach]

It was the g-encoder..just a quick clean and boom fixed hopefully this help people.