What are the best Cutawl blades to use?

[Escritar]

I just purchased a Cutawl to use in the field to make minor modifications and for small projects that do not warrant the time spent setting up a CNC machine. I would like to know the best Cutawl blade to use for each of the following materials:

Coroplast
Foamcore
1/4" polycarbonate & acrylic
1/2" epoxy impregnated honeycomb cardboard
1/4" hardboard
1/4" - 3/4" Finnish Birch and Southern Yellow Pine Plywood
1/2" & 3/4" MDF
Trupan

Thanks in advance for your advice

 

[Craig Sjoquist]

The manual says what blades, Cutawl is a awesome. do they still make them.

 

[Escritar]

Thanks

Thanks for the reply.

I purchased my Cutawl K-11 used and did not receive an Owner's Manual with it. I was informed the "Cutawl Museum" web page that Rhett Bryson at Furman College established used to have a copy of the manual posted but only the cover page is there now. It is quite possible, the entire manual was never posted.

 

[signcrafters london]

I ordered a manual from http://foamboardsource.com in Dec. It was a little pricey for a photocopy -- $15 plus $8.89 for UPS. I can't find it listed on their website now, but I'm sure they still have them.