• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Question What is a good company to outsource custom ADA sign?

nolanola

nolanola

New Member
We would like acrylic and for it to include braille. It has a custom shape and font and color.
 

Attachments

  • IMG_5607 (1).jpg
    IMG_5607 (1).jpg
    49.9 KB · Views: 236
Zendavor Signs

Zendavor Signs

Mmmmm....signs
GB2 said:
Just curious, what equipment is it that you got to do those in house?
Click to expand...
We have a Vision 16x24 engraver/router. It is a great little machine. We are hoping to upgrade to a laser for cutting the applique. That part can get a little slow with the Vision if you are trying to output dozens of signs per day.
 
G

GB2

Old Member
Zendavor Signs said:
We have a Vision 16x24 engraver/router. It is a great little machine. We are hoping to upgrade to a laser for cutting the applique. That part can get a little slow with the Vision if you are trying to output dozens of signs per day.
Click to expand...
Cool...I almost bought a Vision 2424 at an auction last week but I wasn't sure if the taller gantry version would be a better choice someday and I'm not really that familiar with them so I backed off. Also, I was reading somewhere that they are a little slow but that you could also use EnRoute to operate it, which would be good for me.

JB....that edge beveling is usually done manually I believe....very easy just slide the signs down the edge of a beveler. Maybe Zen can tell us if machine beveling is normally done too.

Actually I think I'm the one that derailed the thread....sorry....at least it keeps it active at the top of the list so hopefully someone can answer the OP.
 
Zendavor Signs

Zendavor Signs

Mmmmm....signs
JBurton said:
Now I know you can cut the backers with a laser, but I didn't think you could cut the raised copy with one since it will burn/cut the background. That and the beveled edge that I always thought was a requirement. Reading through my handy sheet, it's not required, though particular measurements are take from the non beveled edge of the copy, leading one to assume that beveling is a standard.
Click to expand...
The applique is cut separately, then premasked and applied to the backer. There has been much debate about the beveled edges, it does not seem to be a clear requirement.
 
You must log in or register to reply here.
Top