What materials can I find at Home Depot to apply vinyl to?

[reQ]

Guess I just can't win, eh ??

Did they turn you to the dark side of "Have to start somewhere" ???

 

[Gino]

Nope.

Now stop spiraling this intriguing thread downward. It's so unbecoming of you. ​

 

[reQ]

 

[Gino]

hahahahaaaa.........

 

[eahicks]

I haven't tried to stick vinyl on a toilet, yet, but I bet it will stick.

 

[Fred Weiss]

I haven't tried to stick vinyl on a toilet, yet, but I bet it will stick.

Just be sure to post heat the curves and corners.

 

[artbot]

flip these over and you have a light magnifying (cheap) transparent substrate

http://www.homedepot.com/p/23-75-in...e-Lighting-Panel-5-Pack-LP2448SCP-5/202653810

 

[greysquirrel]

I'd go with a quiet close toilet seat...

 

[signed off]

I haven't tried to stick vinyl on a toilet, yet, but I bet it will stick.

we stuck vinyl to the lids of the outhouses toilet seats and that was 6 years ago and still looks great

 

[Gino]

we stuck vinyl to the lids of the outhouses toilet seats and that was 6 years ago and still looks great

Yeah, but the first time you go to clean them, the vinyl will peel, just like the wall paper does in a bathroom. There're some nasty stuff going on in them thar places.............

 

[signed off]

Yeah, but the first time you go to clean them, the vinyl will peel, just like the wall paper does in a bathroom. There're some nasty stuff going on in them thar places.............

this thread is going down the toilet, and who washes an out house toilet anyways

 

[Gino]

this thread is going down the toilet, and who washes an out house toilet anyways

We used to have one, so be careful, buster. You hose them down from the outside and then pour the sawdust and stuff in it. Lime goes in after each use. Do it in the Spring.

 

[OldPaint]

i have a door to the house, a 15 window door..........that i put VINYL ON with red intermediate 7-8 years ago))))) looks great today.. the dent was in the door before i put on the vinyl.

 

[Sign Works]

that Is a crazy thought. you are also a lunatic

Mario ...
Better to remain silent and be thought a fool
than to speak out and remove all doubt.

 

[skyhigh]

i have a door to the house, a 15 window door..........that i put VINYL ON with red intermediate 7-8 years ago))))) looks great today.. the dent was in the door before i put on the vinyl.

bondo??? paint???

ya have to kinda wonder how the mind works......
Granted, a rattle can of paint would have cost $2.19......but.....hell, you could have made $12.75 with that much intermediate viny)))))))))))))))))))))

My gawd, your a SIGN PAINTER!!!!! You didn't have any RED paint left over? :ROFLMAO:

 

[OldPaint]

had a crap load of left over red vinyl........that was PAID FOR...... and rather then trash can it, i put it on the door. THE DENT............ really didnt see it till i put the vinyl on. AND YES i could bond it.......JUST NEVER GOTTOIT)))))))

 

[mfatty500]

really didnt see it till i put the vinyl on.

Couldn't see it? It sticks out like a turd in a punchbowl

 

[Sidney]

Actually Home depot has an insulation board with a thin aluminum face (1/2"x4'x8' and 3/4"x4'x8') for $22+. It is great for cutting custom shapes... You can then add a free form graphic (like a sandwich, fish, bowling ball) and make a very cool 3d sign. (Just don't forget to paint the edges black after you cut the shape but before you apply the graphic). Sidney

 

[decalman]

Its too bad they don't have one of these in my area....yuc yuc yuc

 

[The Hobbyist]

I haven't tried to stick vinyl on a toilet, yet, but I bet it will stick.

Hey! There is an untapped market! Toilet seat lids!

A nice vinyl sign on top that reads, "Lift Before Use" :Big Laugh

 

[reQ]

Hey! There is an untapped market! Toilet seat lids!

A nice vinyl sign on top that reads, "Lift Before Use" :Big Laugh

You can also do it in reflective in case some one will use toilet during the night with a flashlight