what temp for IJ180CV3 - small full flood decals + LAM + CCUT

[Quark]

Hi, we're printing small all black decals on IJ180CV3 that will be laminated and contour cut. What temp should I ran the printer at? I run at 42/42/42 F and it seems ok (solvent ink), just wanted to double check if my settings seems right. Thank you

 

[Quark]

Sorry the temp was C not F

 

[Christian @ 2CT Media]

I haven't ran a solvent in years but iirc when I was running mutohs we did 40 pre heat, 39 platen, and 42 dryer. We had issues with buckling and this reduced it so we could avoid headstrikes.

It still gives me nightmares to get head strikes 18' in to 20' panels.

 

[Quark]

Thank you