What To Use On Alumilite Sign Edges

[cinnamongirl56]

I am making a church sign and am using alumalite but top of sign is a high curve like half of a large circle, what I would like to know is, after sign is cut to desired shape what can be used to close up open corrugated edges that will conform to this shape...............edge cap that is used for sides is too rigid....................Hope someone can help me...........t

 

[Shovelhead]

Work it on with a heat gun.

 

[threeputt]

You could get away with filling the flutes with genuine clear silicone. About $6.00 a tube at Lowes.

 

[cajun312]

Heat up the ridge cap with your heat gun and it should follow the curve, use adhesive to make it stay.

Mark

 

[TheSnowman]

They make the pro edge trim stuff that curls now...but not sure what colors they offer.

 

[Billct2]

PRO EDGE would work.
But we use phenoseal in whatever color is appropriate to fill the flutes.
Prefer Phenoseal because it cleans up with water.