window tint with cutout?

[kidriddlin]

anyone ever sent window tint through theyer vinyl cutter and cut out a logo then applied it to the window? any suggestions or experience of the best way to do this would be great. thanks

 

[MikePro]

sharp blade. polyester doesn't cut nearly as clean as vinyl.

 

[Williams Signs]

Yes window tint can be cut on plotter but it uses a 30 degree blade.

 

[XtremeXccessories]

Yes it can be done, but depending on what type of film you're using it can be tricky/impossible. If you're using a film with Pressure Sensitive adhesive you can do it much like a wet vinyl install. Transfer tape it (paper), add a few drops of baby soap or Dawn in a 32 oz squirt bottle, install and wait a few minutes for it to dry a bit, then soak the back of the transfer tape to help it peel easier. Be very careful when pulling the transfer tape off, keep it at 180 degrees.

If you're using film with CDF adhesive (Clear Distortion Free) it isn't tacky like PS adhesive and you won't have any luck unless you're first installing it on a film with PS adhesive and then onto the glass.

 

[klingsdesigns]

tint tek makes a blade just for tint.

 

[BESTBLANKS]

Cutter/Plotter for window tint applications

anyone ever sent window tint through theyer vinyl cutter and cut out a logo then applied it to the window? any suggestions or experience of the best way to do this would be great. thanks

Hi, This cutter is built for that purpose. "GRAPHTEC CE6000-120AKZ Vinyl Cutter."
Please see this page for more info: http://www.bestblanks.com/graphtec.html

Please call us if you have any questions. 888-431-7385 We are glad to help!

>>SPECIAL OFFER<< Receive third extra year FREE warranty with purchase!
Offer good from 8/15/13 - 9/30/13. Customer must register with Graphtec online by 9-30-13 end date.

 

[kidriddlin]

thanks for all the info and input everyone