window vinyl

[J Hill Designs]

since you can still 'see' the graphics through the back, its probably a white overprint

but yeah if that doesnt matter, cover in opaque white (make sure the adhesive is white not grey)

 

[J Hill Designs]

Can't do that. It needs to be view-thru.

check out glassadhere

 

[BIG EASY DOES IT]

Can't do that. It needs to be view-thru.

So don't put the white on. If you want to stick on the inside but view from the outside. Just reverse the print and put it on optically clear vinyl.

 

[BIG EASY DOES IT]

Can't do that. It needs to be view-thru.

The picture you put is not viewthru

 

[J Hill Designs]

The picture you put is not viewthru

picture was posted 4 years ago, not by this person

 

[JoshT]

I didn't put any picture. This is an old thread where someone else asked the same question.

I can't just print on clear, because I need white to show up, but don't have the capability to print white. I know what I'm asking for can be done, because we have done this before by having it shopped out to another company.

They have printed on a view-thru vinyl (the vinyl with holes in it) and have had the adhesive on the side that the graphic is viewed from. It applies to windows very easily and can be removed very easily.

 

[JoshT]

You would use a non adhesive window perf and an optically clear double sided face mounting adhesive that is permanent one side and removable on the other. I carry the perf and mounting adhesive if you need a source.

Non adhesive perf is $0.41 a sq.ft and the mounting adhesive is $0.39 a sq.ft and they both come in 54"x150'

This sounds like what I am looking for. BigfishDM - are you able to send a sample for me to see if this is indeed what I need?

 

[niksagkram]

Take a look at Window Shock with Gecko Grip...... http://www.advantagesgs.com/core/media/media.nl/id.395335/c.394872/.f?h=fa720fc5464141aee958

There are other similar products out there too.

Mark

 

[Berferful]

Reverse print on clear and then put a white backer.

Mirror print, not reverse.