Wrap Print Issue w/Oracal 3951

[Signs4Realtors]

I just printed a wrap for the left side of an F-150 and my material hit the ground, folded wet ink over wet ink (yikes...need a take-up reel), and left some unwanted ink in one of the white letters (see attached pic). Is there any way to take a swab and get the ink off the white letter?
Thanks!

 

[Mike Paul]

Depends on how hot your solvent inks are.

Mild eco-solvent.
If it's just the white material a little iso alcohol may dissolve it and you can wipe it out.

 

[Jester1167]

You can use your cleaning solution for dried ink as well.

 

[raider]

I've touched up the same boo boos with a sharpee's but we were laminating of the print so durability wasn't a problem.

 

[Signs4Realtors]

Thank You! I used my cleaning solution and a swab and it removed the ink from the white lettering perfect. No need to re-print.:U Rock:

 

[Stealth Ryder]

Turn them heaters up a little!!!