Question Wrapping A Hyundai Iload

[WrapYourCar]

Hi I'm having trouble with the rear quarter panels they raise up and dip then raise up again.. has anyone done a perfect wrap without cuts on this area and no lifting? Or is it impossible?

 

[Bly]

We've done a few.
Which area is it you're having trouble with.. that recess above the wheel?
We just did this one recently.

 

[WrapYourCar]

Great job! The area where the windows would be usually on an imax (Except its panel area on the iload )Higher up.. from the wheel.. I can do it but it always seems to have tiny creases or lift over time.. hard to get it to sit in that thin gap properly..

 

[WrapYourCar]

Do you do any cuts in this area or do you do it in one piece?

 

[debeer920]

Are you post heating afterwards? And have you tried using a 3m vcat tool to lay it down?

 

[Bly]

One piece. Try and heat away from the recess as much as possible.
When done properly it will stay down.
We only expect 3M 480CV3 or Avery 1105 to do the job though.

 

[Modern Ink Signs]

Here is what I would recommend.

 

[Bly]

We never use primer & they stay down.

 

[Modern Ink Signs]

Primer is an option. I don't really use it all that much.

 

[Modern Ink Signs]

Channels don't look that deep