gabagoo
New Member
Customer sent me a link to a production board he wanted and it was a magnetic board. Why they call them these is questionable as there is no magnet in them.... In any case I have done many over the years. The link showed that the magnetic pieces could be flipped over to use a different color. I figured I would coat out mags with green, then coat the magnetic side with red. I cut up 93 triangles for this one board and decided to test the magnets and, duh..., yea they don't stick on one side. What was I thinking. In any case I told the customer I would have to make him 2 sets, 1 for each color.
I can tell you it took me a long time with a straight edge to cut the little &^%^%'s...but not all bad, as now I can print the new ones on the Edge and cut them up like I originally planned.
I just want to know who makes a double sided magnetic material? someone is selling boards that can do it.
I can tell you it took me a long time with a straight edge to cut the little &^%^%'s...but not all bad, as now I can print the new ones on the Edge and cut them up like I originally planned.
I just want to know who makes a double sided magnetic material? someone is selling boards that can do it.
