This is about Your Cut Vinyl work that you liked the way it came out. Rather than the current discussions about the World. Please share a picture of a Cut Vinyl job that you did and are happy with your work. Anything ... Flames , Design , letters , flowers. just Anything that you cut yourself. No printed items just vinyl. I am just thinking as positive as I can these days.
-
I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...
Discussion Your Cut Vinyl Work ?
- Thread starter Jeremiah
- Start date
C
ColoPrinthead
Guest
I can post some DOT and VIN numbers if that will make you happy.
Sure, if that is all you are able to do with a plotter and you are proud of your work. Go for it.
bannertime
Active Member
These were some of my favorites from our pre 05 folder. We started printing in house around 99 on a PrismJET so we did have graphics here and there that were printed, but we were primarily cut vinyl on everything. Wasn't until around 03 that we did full color banners on our Graphtec. Still did cut vinyl banners until around 2015. Now we charge a premium for cut vinyl banners. I try to use more cut vinyl these days. Especially on out door signage and on vehicles, but nothing like what we used to do.
We made a few hundred of those KLTY banners, all by hand with plotter cut vinyl. I've still got a roll of the blue banner we used.
We made a few hundred of those KLTY banners, all by hand with plotter cut vinyl. I've still got a roll of the blue banner we used.
Attachments
bannertime
Active Member
I like that. Those could have easily been wrapped, but they'll probably look better and last longer as cut vinyl!
Last edited:
tbullo
Superunknown
All cut vinyl. The Kerner trucks moved away from wraps. The fleet was wrapped at 1 time and they didn't last long enough for them. I think I've done around 35 of those transits over the last 3 years. This made me realize how little cut vinyl we do anymore. Mostly prints now.
John Miller
New Member
Nice work, The Krauss pick-up is snappy and different.
OhioSigns
New Member
I don't do a whole lot of cut vinyl beyond simple 1 color stuff or stuff that is needing to last a long time. Here's a couple pics of our racecars that I will usually do multiple layers of cut vinyl or a combo of print and cut vinyls. This was all done with plotter cut vinyl because I like chrome and fluorescent. The one pic the photographer just happened to get a picture of the car with our billboard in the background too.
