Zund question

[kev324]

We pulled the trigger on a G3 last week, looking to have it installed mid December. We're doing some building modifications to accommodate it and we may have hit a snag. Those of you that have one, how tall is your machine? We are getting the routing option which I think makes a difference. I see 10' is the minimum spec with the gantry system, just curious if that's 100% accurate or if there is some room to "fudge".

 

[scene329]

I'm of no help.. But, our G3 gets installed Monday!! Pretty exciting! We bought the 71" cutter.

 

[RycckG]

I found an previous Zund G3 install guide that claims min ceiling height at 200cm (6.5ft)

Congrats

 

[OahuBrad]

We have a G3 2500 running in the smallest space possible, our Zund (with the hose/cable attachment) stands at just under 120".

 

[HulkSmash]

AZ pro got one this summer, send him a PM see if he can help

 

[National Sign Co. - Print]

L3000 115"

attached pics to show clearance.

 

[kev324]

Wow, I completely forgot about posting this! Our G3 ended fitting fine, it installed about 3 weeks ago. Had to cut about 14" off the end of the gantry pole. Knocked down a wall and relocated another department to make room but it's in the perfect spot right next to the FB950.