Recent content by CStewart

Mimaki JV3-160SP (Used) For Sale In excellent condition with 2 new pumps. Light use. Everything in good shape except needs new capping station and heads are clogged. $5000 O.B.O. -- FOB Salt Lake City Also have 8 full ink cartridges CMYK x2 for $80 each O.B.O. Mimaki brand SS2 -- 440cc...

Found the problem The pulley was not connected to the underside of case. there are 2 screws with a small plate. took the plate off and put the pulley under the plate and reattached and it works now.

Thanks gabagoo, I checked the rails and they are clean. It looks like the rubber pully is not attached to the wiper. Oh well I'm getting fried trying to learn this all on my own and with this sites help. I need a 3-day weekend. will tackle again on monday. just found this site and love it...

Thanks gabagoo, I checked the rails and they are clean. It looks like the rubber pulley is not connected to the wiper. I'm going to check it out more on Monday. I'm taking a 3-day weekend. Maybe I'll be better on monday. trying to learn this in a rush on my own has got me a little frazzled...

The heater fuses are at the back behind the black panel on the left as you look at machine from the back. they are 2 big green fuses with windows in them. If you can see something in the window that means the fuse has tripped. If not it's good.

The wiper does stops at front of head and pulley just spins until it quits when in the thin mode. When in the thick mode the same thing happens but after about 5 to 10 seconds it wipes. The wiper is clean. I'm just getting this used machine up for my first try. Was wondering if the wiper...

OOPS! Forgot to give you my email. graphics@anagraphica.com for service manual JV3-160SP. Thanks, Clark

I was wondering if you could send me service manual for JV3-160SP. We just got this and I am trying to learn and do all myself. Have to flush lines and more I think. Thanks, Clark

I'm setting up used plotter JV3-160SP for my first time. During initial loading of ink everything was fine until It gave me the !Heater warning. I push heater button and get the warning Pre Thermistor Print Thermistor Manual says to call service rep but am trying to avoid flying him in from...