Recent content by DesignCreate

Hi there. I am going to order some new dampers from you for my Mimaki UJF3042. Could you please tell me the proper method of loading it with ink and installing it in my machine?

I just found your thread and am wondering if your head alignment is off. Have you checked that?

Yes hand851 I have completed several air purges. After speaking with Mimaki tech support it appears that the damper adapter may be leaking air into the head. Thank you for your help!

I replaced the O ring and did a few air purges and am still not getting magenta. I pulled the damper and saw that it was low in ink on both magenta and cyan. It is a new damper and I am not sure how to add more ink to it. Could the pump be acting up? I don't see how it could affect only magenta...

Thanks Tipgypsy! I did the ink route leak confirmation procedure from the Maintenance Manual and found no leaks. That indicates that the new cap is sealing tight against the head. I will put a new O ring in today and see what happens.

Here is a shot of the ink Septum. How does it look to you?

Thank you Solventinkjet! I will check it out and update my findings.

I have a Mimaki UJF 3042HG that has been printing fine then a few days ago the test print showed almost no magenta (a few intermittent nozzles are printing). I replaced the damper and cap and cleaned the needle to the magenta. There is plenty of ink left so that is not the problem. I did the ink...

Hi Tipsypsy. I noticed that you have several of the Mimaki UV printers. I have a great UJF 3042 and would love to talk to you sometime about the maintenance of your machines. Please let me know if that would be okay. Best Regards, Cliff

Thank you Tipgypsy! It is working well now.

Hello Signs101! I'm hoping to find a savvy user of the Mimaki UJF-3042 or equivalent. The firmware is 3.10 running Rasterlink Pro 5ip. The inks are LH-200. The problem is with the ink cartridges. I printed on it a few days ago and had a good piece with no ink issues. Today on the local screen...