Recent content by eyekandy graphics

Hello every one! I have a Roland SP 540 V I am soon going to call my Roland tech up here in Ontario before I give a last ditch effort I have been battling with a issue. what happens is, the print is awesome when i am printing just 5 inches away from the "home" (so close to the right...

another image Thanks! I have been running alot of prints through my machine and I clean usually once a day, swab the heads capping station and wipers. I replace the foam about every month, maybe my foam needs to be replaced? when this happened the machine was spotless, no ink build up...

Hello, I have a Roland sp540V i use OEM inks, and am using orajet 3651 i am printing with overprint ( double strike ) and after i get a large amount of prints done my prints start droping ink blobs. what is the cause. i imagine it is building up on the side of the head and then...

Hello, Sorry for the time it has taken for me to respond! and fellow i did this wrap for is a rep. for rock star here in Ontario. so no issues there.

i have repaired it! versa works 4.4 is what i used on vista, and 4.4 i guess is not compatile with windows 8, i got versa works 4.70 and loaded it and it works great now! thanks hope this will help any one that has 4.4 on windows 8 and experiences issues.

thank you, it appears my corel draw is not the issue as when i export it to EPS it has the 100% magenta as CutContour. like all my files i have used before when i open them in versa works it shoes NO cut lines. how do i assign magenta as a cut line in versa works as that is my issue right...

hello every one i have searched my issue alot but haven't found anything that would trutly help me. i have recent got a new laptop as my old one let the smoke out! i got a windows 8 and my previous system was vista. i have a sp 540v running corel draw and versa works. i was on the phone...

hey everyone! thanks for you help, i use 4 pinch rollers for the 54 inch media. ill watch the video shortly. there is no bleed on this art work simply because they are 1.8th scale model decals and are printed on 3651 matte clear, so a slight bit of off cutting is OK but not when it get...

thanks guys!

hello!, i am having one HELL of a time trying to get my cuts to line up with my prints. my machine is only about 15 hours old sp 540v i am printing a 8 inch by 4 inch set of decals for a model airplane, and doing 6 sets in my 52 inch cutting area. when i start to print it prints fine then...

it was gloss black before. 6MM lam.

Here is a Rockstar energy sled wrap I did for a customer. Its with matte laminate except for the small decals used gloss laminate 4 hour install.

wow! so its normal practice for over 100% markup? i have a 40% mark up on my materials. guess i have to change that.

Thanks So much every one! my vehicle wraps were priced correctly i believe. i had warped a Nissan Maxima which is a mid sized car, it wasn't a graphics wrap but simply to change color so it was solid 3M scotch print 1080. my cost on materials ended up to be about 700 dollars once said and...

Hey every one!, just like to say hello and that I'm excited to get to know you. So here, you can get to know me. I know how to use forums very well, running and moderating a couple. I race, build and design RC boats and have a couple that run around 100MPH mark, all electric. I am 21 years...