I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes.
Click to Support Signs101 ...
Incredibly. Once it was unlatched I had to grip the tray it rides on with both hands and brace the machine with my foot to keep it from rolling. Each time this happens I'm convinced I'm going to break the darn thing because the plastic creaks and groans as I pull on it.
While it's not every...
That's all well and good but it's just going in the trash after I pull it out, and our garbage pickup doesn't charge us based on what ink carts are bloated vs not bloated.
Unless there's something else I need to be doing when replacing these things I'll be calling our service tech on Monday to...
Seems the hits keep on coming with this machine. The past few times we've gone to replace our magenta ink, the cartridge itself has been so distended that you can barely pull it free from the slot without fear of breaking something. I've tried letting the machine sit for a while to see if it...
Seems the hits just keep on coming. After struggling with an ink dropoff issue for several weeks (which magically cleared up, thank goodness) this has now popped up. About every 2 or 3 prints the press will add a 4" bottom margin before beginning the print. While it's not a huge issue and that...
Wish I had a spare box to give Caldera a try on. Been using Onyx 10 for about a year now and while it's not bad, it's not really good, either.
I think obtuse is a good way to put it. Vital options buried in menus and a queue system as flexible as an I-beam are the biggest detractors for me...
The saga continues...
The warranty printhead that HP sent us ended up being bad right out of the box, so they're going to try and schedule a tech to come out and take a look at it and also shipped out a new printhead. The second replacement head should be here today, and I sincerely hope it is...
All the nozzles but maybe two or three showed up in the test plots.
I talked with our supplier and they're going to warranty a new set of printheads for us. Should be coming in today so I'll swap them out and see if the issue persists. If it does I'll look into having a tech come out to check...
I spent some time Friday observing the press for a bit and compared the edge of an unfinished print (oh how I love jams) to the band and found that the pattern matches up exactly so it appears that the press is, indeed loosing pressure to the printheads, or the printheads themselves are going...
You'll have to explain which piece you're talking about a bit. I'm familiar with most of the jargon but still clueless when it comes to some things and their proper names (well apart from doo-dad and thinger).
So far it only happens once per print, within the first 12 inches. It's about 1.5" long but varies in its intensity. It ranges from barely noticeable without the use of a loupe to downright obvious like in the photo I posted. It's happened 5 times today so far and seems to be pretty random. It...
We've just started having this issue with our press. Within the first foot of the print we will get a noticeable horizontal band across the entire width of the print.
The printheads appear to be fine as the test plots show that all but one or two nozzles are firing across all 6 heads. I've...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.