I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes.
Click to Support Signs101 ...
Hey Fred, yup he just got it fixed. He just had to change the parallel driver in the Sentinal Dirver to read "all features and subfeatures will be installed on local hard drive". For one reason or another the feature had been x'd off.
Thanks for your help!
The Flexi seems to work fine...the problem is that the Omega won't open except in the demo mode.
We reinstalled the Omega 3.0 and still having the same problem even after moving the Flexi on to another comp so that there wouldn't be any conflict on the one pc.
Hmmmm...
Good day, I just loaded Flexisign onto my comp and suddenly Omega Version 3 wouldn't open for me. I just the prompt asking whether I'd like to use the demo mode or retry the security key. No matter how many times we retry the key it won't work. I'm wondering if the Sentinal driver may have been...
Well we received our serial cable from Graphtec and all is well...I think I'll have to drop a line to Gerber to see if they be able to address this issue.
Also one to Graphtec letting them know that they should make potential buyers of their producs aware of the inability to work with Omega USB...
Hi Bob, I've done a couple of searces on the net for similar problems and found one on the Letterhead Bullboard. Same problem as me right up to the USB communication error prompt. Turns out for her it was the Omega that wouldn't communicate with the USB just like you had mentioned in your...
Thanks Bob and Gary...I've got a call in to Omega Tech Support so we'll see what they say. I'll also drop a line to 4edgetalk and see if someone there might be familar with it.
When Graphtec sent the plotter they didn't include a serial cable so I guess I'll have to pick one up. Would you...
Hi guys, my company just purchased a new Graphtec and when I try to export an Omega file to it I get a:
"Communication error on:
Cannot open USB for spooling (insert name of file here)
When the plotter was initially installed and loaded USB was chosen and the Vendor ID and Product ID codes...
Hey Checkers, thanks for the info. I'm running version 2.1 so maybe I'll check with the local rep to see what kind of dollars I'm looking at.
Thanks again...
Hey guys, I know I could run this queston by the rep but I thought I'd check with y'all first as you may not laugh at me...:peace!:
I'm running Omega CS at the moment but would like to have the option of running a thermal printer. Can I get an upgrade to the CS which would allow me to do that...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.