• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Recent content by missytoe

  1. Print job not lining up with location substrate - printing "off the page"

    I have an HP365 Latex printer. We are using a 30" 3M window perf. We loaded it just fine, the printer knows it's 30". I am using a High Saturation profile. When it prints, it's printing as if the substrate is centered in the middle of the printer, not aligned to the right. So it's only partially...
  2. Need Help HP365 - reproducing 3M 680 colors and printing Black on IJ680

    Hi all, i have an HP365, and am fairly new at this. We work with emergency vehicle graphics and are trying to print equivalent shades of 3Ms 680. If we print black on the IJ680-10 will it have any reflectivity? Has anyone been able to reproduce 3M 680 Ruby Red or their 680 Orange? And if not...
  3. loading 3M 8515 to GFP laminator

    Hi, we just got these two items. How the heck do you get a new roll and loaded to the core without a bunch of crinkling and sticking to itself? We've tried taping the liner to the core, and pulling the laminate down but we can't get the liner to stick to the core (with tape). Help!!
  4. Does 3M8170-50 work on thermal printer?

    I know it's not officially guaranteed by 3M but wondered if anyone tried it. Thanks.
  5. Conspicuity chevron CMYK colors

    Are there standard CMYK colors for printed fluorescent yellow-lime and red chevron striping used on the rear of emergency vehicles? Thanks Melissa
  6. Oodles of requests for trim wraps and chrome wraps

    We are getting this a lot as well. We produce ambulances so we often powder coat paint the chrome areas rather than wrap them. But it's definitely a trend!
  7. Texat Application Fluid from GSG vs Rapid Tac?

    Yikes, sorry, not the Diamondgrade; it's for the translucent overlay we use over top for the chevron striping. It's 3M Scotchlite Transparent. Regardless, has anyone used both and how do they differ? Thanks.
  8. Texat Application Fluid from GSG vs Rapid Tac?

    Our installers currently use Rapid Tac for installation of 3M Diamondgrade Conspicuity on emergency vehicles. We had a guy come in to do a partial wrap on a vehicle (3M 1080) and he was using Texat. Can anyone tell me the difference and give me your opinion? Thanks!
  9. Suggested dpi for non-vector image

    Cool, I hadn't heard of this. I usually set up PSD at 100% scale and final dpi, place the original and save. It will be blurry but not pixelated. This particular image is kind of abstract so I think it will be okay even if a blurry.
  10. Suggested dpi for non-vector image

    Thank you, all! The customer is providing the image and I have not seen the quality or resolution yet. I will forward these instruction on to them and check the image when I see it. Thanks!!
  11. Suggested dpi for non-vector image

    We typically deal with vector art but our customer has a large photo image (say 3.5 feet x 3.5 ft) they want to use. What dpi/resolution is appropriate?
  12. HP 365 vs HP 560

    Yeesh, good to know.
  13. HP 365 vs HP 560

    Thank you for your feedback. We do have a dealer and are at the very end of finalizing the deal. Our owner had spoken with a print shop associate who brought up some points and so she had me do some more due diligence. The print guy did all kinds of jobs, whereas ours are very specific, same...
  14. HP 365 vs HP 560

    Do any of you have any issues with the alignment on the HP 365 when loading a new roll? My understanding is that if it is off, the printer will send out a message...is this true? Thanks!
  15. HP 315 or 365 - built in spectrophotometer

    Hi, how important and helpful is the built in spectrophotometer on the 365? Can the color matching still be done without it, or is it just more difficult? Thanks.
Top