Recent content by n893

do you every try to remove air from subtank using airtool? they provide small connector n tube with the machine. and you can bleed it using plastic

hi everyone... i need some help to get mimaki ucjv300 part manual. i would be very greatful if somebody can share it with me... thanks for helping

Usually choose roland default cmyk output icc profile... It should help

The bleed is a big warning you will need a new print head soon...

maybe your room too humid Sometimes humidity cause ink to not dry properly... try to control humidity around 50-60%

try to clean raster strip Try to clean the raster strip using 70% alcohol with face soft tissue paper... wipe it from start until end of the strip...

try to make new icc profile Maybe you can try to make new icc profile using i1 or other device...

Hi... anyone have service prog.exe and the manual book for s40670? Thanks for sharing...

Try to disable anti virus before you rip... sometimes auto update on software work in background and it mess with the rip process..

glad to hear that...Hope it run smooth and not making trouble again... maybe the printer just need some love n care... hehehehe

I think your current print head can still be use for few meters print with slow feed and slow head movement mode... its getting blur like that because the membrane inside it crack... usually because of time and usage... but not proper grounding can be real problems to make it crack... i got lots...

Not try that yet... usually vinyl not static... im using ritrama and not get any static problems from it... when using pvc sometime we got the static problems, so we place cooper wire on top of the material at the rear printing bed (before it hit the pinch roll) from printer body to printer...

im not sure where to get it in your area... but we can buy it at building material store here... and make sure your machine is completely turn of and unplug before you install the new head...

thick cooper wire and about 1m cooper 1cm diameter pole... and stick it to the ground... and make some grounding from diffrent point of your machine.

grounding cable... do you have proper grounding cable attach properly? chinese dx7 machine seems very sensitive with grounding and static voltage...