Recent content by SeMi57

I buy off Graphic Resource Systems in New Jersey and they will supply you with 4" x 4" samples of the items they supply so you can feel and see what each one is like. They have stacks they put together with a binder screw holding them together, kind of like a sample swatch collection.

If it were me, very small shop (me alone), I would farm most of it out to Peachtree City Foamcraft and you could still attach your lettering and tree the way you want and they will create the spot and hook up for EMC. They will deliver it to your shop and easy to install, one day the sign will...

Chris is right with his comments, that is a good recommendation, unless your printer is also printing the spit lines on each edge of the print (which can be switched off in the printer menu itself) if it is printing them on the edges of the print, take some of the waste vinyl from other jobs and...

Just use a 13oz. banner material and replace the shades, if it needs to be laminated you can just use a spray laminate or roll on a liquid laminate.

Memory I'm a little afraid of pulling out the memory and messing something up on the board. If it is a memory problem why was I able to print a larger file size and 20-feet continuously without errors and flawless. I still feel that it is connected with the file being created in Photoshop.

When saving them in the Flexi 10 there is a place where you can save it to an earlier Flexi version or change your work area to that of the 8.6 and save and you should then be able to open them in the older program. If a font is missing on the machine it will ask you which font you want to use...

Gac05 I looked at the failed prints and from 6-inches away I can see no stepping (left and right) as you mention. If that was the problem why would other prints work fine?

Thank you, it is something to try. I will try it this week end. I will let you know how I make out.

If this has been discussed before if someone can provide me to that post I would appreciate it. Previously this machine has been a champ. I have been having this problem for a month or so and only on certain prints. These few prints after about 15-inches of printing the machine will 95% of the...

Could you please send me a coy of the manual for the 1204, email is bigkev@nep.net thank you in advance for your help... Your thoughts about updating the Firmware? My printer has been working fine, except for a no good card on a the Cyan cartridge, was giving me a "[C] Not Original" on the...

I am planing on purchasing a CG-130FXII so I will be able to countour cut my prints. Can anyone tell me if I will need to up-grade my cutter program, currently FlexiPrint and Cut Version 8.5?