Search results

Welcome to the site from all of us here at Summa!

Looking at the screenshot photo it appears that you are running the OEM version of Corel which may be why some of the features/tools are unavailable. Corel has a forum on their website where many have posted about limitations using the OEM version, so I would maybe read through those to see if...

Not sure why you are being argumentative when I am simply trying to help by offering up suggestions. If you want to continue cutting the way you would prefer then go for it. Just offering pointers based on years of experience with these cutters. Best regards, Phil Johnson Summa Inc.

You are able to make much more fine tuned adjustments that are more controllable when adjusting the pressure versus the depth. The depth is a manual adjustment subject to the operator of the cutter setting it the same each time and if you use too much or too little blade depth the cut quality...

As was mentioned previously by Snydo, I suspect that there is too much blade depth and not enough pressure. The pressure setting I use for similar materials is typically 80-100 grams, so the pressure seems a bit too low. Optimal blade depth on the tangential plotters is having the blade...

Have you tried Clean Cut blades? Looks like they have the 60 degree blades for your Mutoh. Here is the link - Mutoh Plotters - Clean Cut Blade

Good morning, I hope everyone is having a great week! I wanted to let everyone know that we are running a black Friday sale on all of our machines this week. During the promotion we will be offering the choice of a low interest rate lease option or an instant rebate of up to $1,200 off our...

Good afternoon, I know what you are describing and I have cut a fair amount of this material. I wouldn't recommend changing from tangential to drag knife mode in this case. What I would recommend is to increase your overcut slightly so that the blade extends a bit further in the corners...

Good morning, Just thought I would let everyone here know that we just added a 54" S2 D Series this week and will also have an S2 T Series 64" within the next week. Please feel free to email me at philj@summa.us if anybody might be interested in either unit or if you have any questions...

Hello Everyone, I hope everyone is having a great week! I wanted to let everyone know that we will be exhibiting our full line of roll fed plotters, thermal transfer printer cutters, and flatbed cutters at the upcoming SGIA Expo in Las Vegas next week. Our booth number is 1460 and we are...

Hi Rainbow, I received your email and sent you a reply already. As was mentioned, this is likely caused by a defective power supply. The part number and replacement cost info are in the email I sent you. Please feel free to contact me if you have any other questions. Best regards, Phil...

Hi D-Nice, I would be happy to answer any questions that you have about our different models and can compare them to the Roland that you are currently using if you would like. I can be reached by email at philj@summa.us or by phone at (800)527-7778, ext 112. Also, we are currently running a...

Yes, this is possible. The process does vary depending on which cutting program you are using. Assuming you are using Winplot you simply need to draw your kiss cut(contour) lines in black and your flex cut(perf) lines in red(100% magenta, 100% yellow) and there is an option on the output screen...

Good morning, What I would check is what you have the feed set to in Winplot. If you have "feed after job" selected then the cutter will feed the material forward and cut the next copy in the feed direction(y-axis). Conversely, if you have "no feed after job" selected the cutter will cut the...

Hi Zambookajoe, Sorry to hear about the difficulties with your Summa. This issue could be caused by a number of things, but the most likely culprits are that the firmware update hadn't been completed before a reboot was done or there is a potential issue with the mainboard. When doing the...

Summa Questions Hi Matt, Please feel free to call or email me if you have any questions about the Summa cutters and I would be happy to go over everything. I can also get you in touch with someone that has used both Graphtec and our cutters if that would be helpful. My email is...

Good morning, I hope everyone is having a great week! I just thought I would let everyone know that we added two additional S2 units; one 54" S2 D Series and one 64" S2 T Series. Please email me at philj@summa.us if anybody would like additional information on these two machines. Have a...

Hello Sinclair, While I am also obviously biased, our plotters have many advantages over the Roland GX including cutting speed(44 in/sec versus 33 in/sec), cutting force(400 grams versus 350), max cut thickness(30 mil versus 20 mil), and most importantly the cutting accuracy(our models have...

Hi BigBen, What type of material is it you are using? Also, what software are you using for design and cutting? Best regards, Phil Johnson Summa Inc.

Hi Risun, I might be able to get you in touch with someone. Are you looking for someone local to produce this job or could someone out of state produce it for you and ship you the prints? If you could, please shoot me an email with your contact info to philj@summa.us. Regards, Phil...