Search results

220 sq ft/hr , pretty much same as a 60600 at comparable print quality

I do exactly as you have described and do not have this problem, except I don't merge the files. I just open them individually in onyx and nest/print them all at once

I've seen this on some vinyl and paper for the first few feet of a roll and after the roll sits out out of the machine. It's like something happens to the first few winds on a roll from air exposure and it get splotchy like that. There is a 6 mil vinyl I use and the first couple feet on a...

Yes I expect it to last a year or two at least, unless printing Alumigraphics and similar materials goes wrong. Another advantage of the cheap printhead is I'm not scared to print on these types of materials, would never run that in the Colorado as a head strike would be very expensive

The Epson has slightly better quality/less grainy prints because of the LC, LM. I have received rare complaints for small stickers printed on the Colorado for graininess from customers that have previously purchased from companies running epson/roland solvents. Other than that the prints looks...

That's what I thought until my Colorado went down for 2 weeks, was forced to buy another printer and take a closer look at the numbers. Definitely have a back up in case a machine goes down.

Service contract is close to $700 per month if purchased on day one with 5 year contract. If you don't do a full 5 year or start the contract after warranty is up you will pay more

For the last 3 months I've been printing 20% of my wallpaper on Epson R5070L and the other 80% on the Colorado. The more I run the two printers side by side the more it pains me knowing one costs $19k, prints at 190sq ft/hr and the other costs 75k and prints at 290sqft/hr, and then there is...

Also as your printheads get older/lose nozzles you speed will go down. My Colorado is 2.5 years old, couple of nozzles missing per printhead and I'm only able to print in Matte high quality/ matte specialty mode and gloss specialty on most stuff so that it can compensate for the missing...

Be sure to take a close look at the numbers, it is an expensive machine with an expensive service contract and expensive printheads, also Canon USA can be hard to deal with. The low ink cost is not as great of a deal as it once was as other manufacturers have introduced bulk ink systems that...

No, the belt replacement is a 2 day job waiting for glue to dry. not something you want to do regularly if you could even get the belt off in a reusable condition

I had a very tough time selling a working VS300, had it listed for $1500 for 6 months, lots of "is it still available" but no sale. priced to basically cover the 1 year old printhead cost. Ended up taking the listing down, tired of the "is it available"

We ship out everything we make and roll it up pretty tight, 4 panels of 108" each rolled up to fit into a 4" x 4" box. No issues, key is to use transfer tape with release lines adhesion feature such as R tape 4075 RLA, the "RLA" makes a big difference for shipping

Dirty Encoder strip probobly

Ship it out in the same boxes you receive the vinyl in

I would tile it into 10ft sections and charge for any waste material

Can you hang banners inside, I recently saw something similar done with banners on the inside.

I only get asked for discount codes/coupons :roflmao:

Most likely a confused buyer if they can't remember where they bought the signage from. Sometimes on Etsy customers check out as guests and then lose order info and have no idea what/who they bought from. Creating an account during checkout would make it very easy to contact seller (Etsy...

Clark Construction has their banners all over the project, looks like a pretty big company https://www.clarkconstruction.com/