Search results

Remove, clean and re seat printhead cables

Spend more time setting up the cutter on the machine. Don't just do 1 test cut and think everything is ok.

In sticky situations, ask the client if they get the service on their Toyota done in Japan, or down the road at one of their agents.?

To me, Flexi is inferior to Signlab. when switching between programs, the shortcut keys screw you over.

Would be interesting to see a test print. That set of fonts are missing half of the nozzle shots

No such thing as a Roland xc640??

Increase them. Dont go by the manual. All vinyls are different and some require more heat to set the inks. Its a trial and error situation. You need to work out what is best for your situation.

Wrong temps.. The magenta is pooling.

Those test print weren't showing before.. Are the prints from the new head?? Also check that the printhead wiper is clean

Sounds more like you have air in the system. run an ink change sequence and see if it helps https://www.manualslib.com/manual/1869614/Mutoh-Valuejet-Vj-426uf.html?page=108

Sounds more like you have air in the system. run an ink change sequence and see if it helps

Laminated corefute. They just glue them together to make them stiffer.

You can almost pick the dust and rubbish off them. You will see when you get the fan out.. It's something very few do during the life of a machine, but you will really notice the difference on how much suction you didn't have.

Simple task, just fiddly.

Remove the back lower cover. You will need an allen key to undo the two bolts on each fan. Dont lose the white spacers that go in those bolts.

Are your temp settings high enough? Can be caused by pooling, if you say your test prints are perfect.

Try a total power off, hold down left top right buttons, then turn main power on.?

Clean your encoder strip and the sensor on the cut carriage. You may also need to do an initialization setup

Turn windows updates off

I use Print Doctor equipment, only the face of the nozzles are every submerged whilst cleaning, and I have recovered hundreds of heads. Also your hate for Chinese equipment and parts needs to be bought to the attention of the moderators of this forum. You sell used parts that you say are tested...