• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1.

    Problem head rank number

    Heres a random head rank for a DX7 in a VS640

  3. Problem with Signlab

    If you have a copy of the old .ini file, swap it with the new file.

  4. Xc 540 head clunking

    The xc has a 20mm bearing so they are not the same

  5. Xc 540 head clunking

    Sounds like bearing block on the carriage needs cleaning or replacing
  6.

    Roland SP-300 Cutting Alignment Issue

    Perform “PRINT&CUT ADJ.” in the Service menu

  7. Printer Not Recognized

    Uninstall latest Windows Update.

  8. Roland gs24. Not indicating “READY” on either computer

    Plenty of threats stating the latest Windows update has caused problems. Uninstall the latest update.

  9. HELP - Roland GX-24 Issue

    Uninstall the latest windows update.

  10. Mimaki JV5-160S Printing Head Problems

    Where are the JV5s kiwi.. I purchased the one from Vivid Images in Hamilton years ago, and I have never heard of you. I rebuilt that machine and sold and shipped it to Australia. Mike sold it because it required 4 new heads. Those heads were all leaking between sectors, and not just nozzle drop...

  11. Need Help Roland SP540V {PINCHROLL ERROR INVALID ID RIGHT POS.} Changed data cable - cut carriage sensor - cut carriage board..Please HELP!

    Re seat the data cable and try a different position. Check no bent pins on the data cable. Also recheck the sensor plugs and wires for continuity. https://www.manualslib.com/manual/825823/Roland-Versacamm-Sp-540v.html?page=99

  12. Best practice for cut vinyl ACM sign

    What is the background color? Is it a standard color? If it's a custom back ground, just print ,laminate and wrap.

  13. PC stopped detecting my USB for my ROLAND GX-24

    Is it showing as a generic printer in control panel settings, under printers and devices. You may also need to change settings in cmos to recognize the cutter. Been years since I owned one of these, but remember it took some setting up for it to recognize it. Will also add that I have never run...

  14. PC stopped detecting my USB for my ROLAND GX-24

    Have you tried connecting using the USB type B port?

  15. strange color problemb

    Have you done a test print using the test print in Versaworks.? also a photo of the two lines from the captops to the pump would help us. Are you losing cyan to the waste bottle?
  16.

    Opinion Screen-printed shirts - Quality check on aisle 3

    Even after screen printing, we used to run an iron over the print to seal then off after they were hung to dry..I wasn't talking about heat transfer..
  17.

    Opinion Screen-printed shirts - Quality check on aisle 3

    Run a hot iron over the prints again. May not have got enough heat to seal them off first time around.

  18. PC stopped detecting my USB for my ROLAND GX-24

    Was it working in the first place?

  19. Roland SP300i Replace?

    Just replace the head. Lose too much time trying to recover a DX4 head, when you could be printing flawlessly.

  20. Is your shop prepared for the upcoming barter system?

    Good evening all, my name is Charles Ash.. My barter system works like this, I work, you make the check out to C ash... That's big C little a.
  21.

    Question DX7 Printhead Dented/Destroyed? Visible damage. No ink is printing at all. How did this happen? Help?!

    That is not a sideways strike
Top